LiteSpan Insulated Panel Estimator

Panel count & length · indicative weight · thermal R/U · fixing & flashing checklist · Technopol SA

Roof / wall area

m
m
Plan area A = L × W = 600 m². “L” is the panel run (slope) length; “W” is measured across the panel cover width.

Panel selection

Fixing layout

lines
Support lines crossed by each panel run (design span governs spacing — have an engineer confirm; min bearing 50 mm).
mm
Used only for the indicative PIR-panel weight (2 skins + core). Roof skins 0.3–0.58 mm; StoneWool ≥0.5 mm.

1 · Panel count & linear metres

Panels across width, N
–
Linear metres of panel
–
Cover width used
–
Panel coverage area
–

2 · Indicative panel weight

Weight per m²
–
Total panel weight (as supplied)
–

3 · Thermal performance

Thermal resistance, R
–
Thermal transmittance, U
–

4 · Fixing & flashing checklist

Primary fasteners
–
Side-lap stitching screws
–
Perimeter flashing screws
–
Gutter brackets
–
    Disclaimer. Indicative estimate for early take-off and comparison only — not a construction schedule, structural design or fire rating. Panel counts assume simple runs; add for cutting waste, openings, end-laps (150 mm min) and non-rectangular geometry. Cover widths, R/U values, StoneWool panel weights and per-support fastener rules are taken from Technopol LiteSpan brochures / CAD details; EPS panel self-weight, PIR panel data and any fire-resistance rating are not established in those sources and are flagged above — confirm with Technopol before ordering. EPS is combustible; the only current reaction-to-fire claim on FR EPS is SANS 53501-1 Class B-s1,d0 (not a fire-resistance rating). © Technopol SA (Pty) Ltd · Leaders in EPS since 1993 · info@technopol.co.za · www.technopol.co.za · (011) 363-2780/1/2